SLAM Project 2015: Maritime Section

March 17, 2015

Here is another snapshot of the conservation work ahead for our upcoming new exhibits.  The Alaska State Library Archives and Museum (SLAM) project is in the construction phase, with opening of the new building planned for June 2016.  There are approximately 22 interpretive areas, around 90 exhibit cases, and roughly 2,500 objects. This section, Maritime, has a LOT going on!  Anjuli Grantham was here from Kodiak earlier to help with some artifact selection and history, Tim Troll and Andrew Washburn have both told me a lot about the Bristol Bay fishery, and I’ve been in touch with Louie Bartos at least weekly for some time now getting a replica sail made.  Here’s a link to an article about that sail by Megan Petersen at the Ketchikan Daily News, and another article by Matt Martin over in Dillingham for public radio station KDLG.

ASM 97-34-1Bristol Bay Double Ender, a fishing boat that will go on display, rigged with a new sail made by master sail maker Louie Bartos, and film footage will be projected on the replica sail.

ASM 97-34-1 Bristol Bay Double Ender, a fishing boat that will go on display, rigged with a new sail made by master sail maker Louie Bartos, and film footage will be projected on the replica sail.

Tim Troll saw the boat, and had lots of good info.  Here he is looking at the sprit, part of how the sail was held up.  Tim thinks we ought to paint the boat.

Tim Troll saw the boat, and had lots of good info. Here he is looking at the sprit, part of how the sail was held up. Tim thinks we ought to paint the boat.

Here's a plaque inside, I don't know exactly what the numbers stand for.  It was from the Libby McNeill & Libby cannery, and would have been a peachy orange color originally.

Here’s a plaque inside, I don’t know exactly what the numbers stand for. The boat was from the Libby McNeill & Libby cannery, and would have been a peachy orange color originally.

We have two sails that go with this boat, but didn't want to fade a rectangle into one by projecting film footage.  So I took the sail to the loft studio of Louie Bartos so he could measure and make a replica for us.

We have two sails that go with this boat, but didn’t want to fade a rectangle into one by projecting film footage. So I took the sail to the loft studio of Louie Bartos so he could measure and make a replica for us.

I first heard of Louie at the WOAM conference back in 2010.  An internationally renowned sail expert right in Ketchikan!  How could we pass up the chance to get a sail made? Here Louie shows a couple of his sailmaking palms...

I first heard of Louie at the WOAM conference back in 2010. An internationally renowned sail expert right in Ketchikan! How could we pass up the chance to get a sail made? Here Louie shows a couple of his sailmaking palms…the thumb goes through the big hole.  When you make a sail, you need more than a thimble…

We've got a rudder, and will use it.  But will need to make a replica mast because the ceiling is just not quite high enough. And we will probably buy new mast hoops because the originals are rather delicate now.

We’ve got a rudder, and will use it. But will need to make a replica mast because the ceiling is just not quite high enough. And we will probably buy new mast hoops because the originals are rather delicate now.

More photos of Maritime Section stuff below, but I have to make a pitch for our WISH LIST of things we would like to add to the Alaska State Museum collection for interpretation and to include in the display of the Bristol Bay Double Ender.  I think we could find loans of most of this, but ideally we would like to add items to the collection that come from the Bristol Bay fishery from this historic period…

  • Roller (that gadget that helps pull the net up without rubbing on the boat)
  • Cleats associated with roller
  • Oarlocks
  • Bailing Cans
  • Bilge Pump (the one that was supposed to come with the boat went missing in Homer)
  • Tent
  • Stoves: both the “Swede Style” and the “Italian Style”
  • 5 gallon water beaker
  • Old box compass, a few inches on a side
  • Old cannery dishware
  • Samples of caulking and caulking tools
We are putting out quite a few salmon cans, and their labels are quite marvelous.  We will be devising various methods of monitoring the risk from light fading for items like this.

We are putting out quite a few salmon cans, and their labels are quite marvelous. We will be devising various methods of monitoring the risk from light fading for items like this. (ASM 2000-39-1)

This is a stencil set from a cannery, and needs to have the dead spiders and dust removed without losing its authentic grime.

This is a stencil set from a cannery, and needs to have the dead spiders and dust removed without losing its authentic grime. (ASM 2005-9-36)

Several folks on staff are excited about this stencil from a boat called the Goldywn.  However, how to unroll and flatten it, how much to unroll, and whether to include the chunk of oar handle are tricky conservation dilemmas.

Several folks on staff are excited about this stencil (ASM III-O-635)  from a boat called the Goldywn. However, how to unroll and flatten it, how much to unroll, and whether to include the chunk of oar handle are tricky conservation dilemmas.

This deadeye, ASM II-O-290 from the Star of Bengal has some serious spalling rust issues.  Staff are disturbed by the resemblance to a skull, given the history of the ship...one of the worse maritime disasters in Alaska history...more than 110 Chinese cannery workers perished in the wreck.

This deadeye, ASM II-O-290 from the Star of Bengal has some serious spalling rust issues. Staff are disturbed by the resemblance to a skull, given the history of the ship…one of the worse maritime disasters in Alaska history…more than 110 Chinese cannery workers perished in the wreck.

This huge wok, ASM 2000-4-1 also has some rust issues.

This huge wok, ASM 2000-4-1 also has some rust issues.

 

We have quite a few instances like these lure where the object numbers have been put on in a place that is not the best for display purposes. (ASM 98-40-1).  We'll need to remove the numbers and re-label these lures.

We have quite a few instances like these lures where the object numbers have been put on in a place that is not the best for display purposes. (ASM 98-40-1). We’ll need to remove the numbers and re-label these lures.